WINTERWIND 2014 PROGRAM

DE-ICING

  • De-icing of wind turbine blades by means of an helicopter opens up new opportunities Hans Gedda, H Gedda Consulting
  • Development of a LESZLPT based numerical method for ice accretion simulation Robert Szasz, Lund University
  • GreenWind GLOBAL de-icing system Gernot Schenk, GreenWIND Global
  • Wind turbine blade anti-icing by means of warm air film heating Lorenzo Battisti, University of Trento

DETECTION

  • Combitech–the partner for monitoring Patrik Jonsson, Combitech
  • Monitoring icing events with remote cameras and image analysis Dominic Bolduc, TechnoCentre éolien

STANDARDS

  • Extreme cold start-up validation of  wind turbine components by the use of a large climatic test chamber Pieter Jan Jordaens, Sirris/OWI-Lab
  • Serious consequences due to excessive ice accumulation on a typical wind turbine Abdel Salam Alsabagh, Narvik University
  • Structural performance of offshore wind turbine in ice-covered waters Maria Tikanmäki, VTT

MAPPING

  • Effect of climate conditions on wind farm performance in cold regions Geanette Polanco, Narvik university

ENVIRONMENTAL IMPACT

  • Year round monitoring of low frequency noise in harsh climates Antti Leskinen, APL Systems Inc

CONSTRUCTION

  • Efficiency of electric motors in cold regions Umair Najeebmughal, Narvik University

PRODUCT EXPERIENCE, OPERATIONS AND MAINTENANCE

  • Implementing a 3D CFD model to study the performance of porous fences under harsh climatic conditions Yizhong Xu, Narvik University College

HEALTH AND SAFETY

  • A tool for the assessment of stochastic danger levels from ice ejected from wind turbine blades, Björn Montgomeri, Programografik

PRODUCTION LOSSES

  • A parametric analysis of ice protection systems Matthew Wadham-Gagnon, TechnoCentre éolien
  • Simulation and validation of the aerodynamic performance of iced wind turbine airfoils Richard Hann, University of Stuttgart

COMMERCIAL

  • Cold climate rotor blade repairs using advanced UV curing resin system Ville Karkkolainen, Bladefence
  • Commercialization of VTT’s know–how in ice prevention of wind turbine blades Esa Peltola, VTT
  • Developing ice detectors for wind turbines–outlook of requirements and improvements from 1990 till today Jarkko Latonen, VTT
  • My experience as a HSE-officer Anna Johnsson, Dekra
  • Ice detection on rotor blades Dietmar Tilch, Bosch Rexroth Monitoring System
  • Rotorblade maintenance in the Arctic Egon Leonhardsen, Arctic Wind
  • Data driven production optimization from wind turbines Jonas Corné, Greenbyte
  • Skills and training for the wind industry Liselotte Aldén, Uppsala university
  • Turbine mounted Lidar for performance optimization: the case of cold climate and complex terrain Samuel Davoust, Avent Lidar Technology
  • Comparision of Lidar and mast mesurements in complex terrain with/without FCR and CFD correction Martin Sigurd Grønsleth, Kjeller Vindteknik

Download the program as PDF »